ARIA Flush Device Mount Installation Guide

ARIA Flush Device Mount Installation Guide

Device Installation

1. Shut off circuit breaker and disconnect existing device from wall.
2. Using dotted line on instruction guide, cut hole to allow Mount to be inserted.
3. Optional: Use Smash Plate as guide, secure to wall using pins as a stamp.
4. Feed wires through pre-drilled hole and place the Mount in the cavity
5. Use drywall compund mud to cover flange. Once dry, sand. Repeat as needed.
   
6. Paint to match surface
   
   
7. Attach the unit to the Mount in the same manner as you would to drywall
8. Connect device, turn on power and enjoy!
   

Pot Light Installation

1. Drill hole in Mount according to the dimensions of the pot-light being used
   
2. Secure Smash Plate to ceiling frame prior to drywall using nails or wood screws.
   
3. Note the location of the cutout before installing the drywall. Install drywall and cut using the Smash Plate as a guide.
   
4. Disconnect power and feed wires through ceiling and Mount
   
5. Secure Mount using staples or drywall screws.
   
6. Use drywall compund mud to cover flange. Enjoy!
   
7. Connect wires and place components through hole. Individual pot-light install may vary
   
8. Enjoy!