HX5 ™ PAPR
Simplifying your protection
Protecting you for life’s best moments
Contents
HX5 PAPR Powered Air Purifying Respirators
HX5 ™ PAPR
Simplifying your protection
With the simple press of a button, experience clean filtered air in an instant as the HX5 removes up to 99.97% of particles down to 0.12 microns, taking care of your breathing so you can focus on the task at hand.
Through its robust housing, the HX5 is able to withstand the physical demands of multiple applications and is certified to IP53, protecting the unit from dust, rainfall and moisture when cleaning and disinfecting. The HX5’s design enhances comfort through its supportive vertical mounting position, evenly distributing its weight to reduce the impact of aches, strains and fatigue.
The HX5 is certified to the standards below:
Part # 03-601
HX5 ™ PAPR Easy Clean Starter Pack
- Rechargeable battery and charging bank
- Easy clean belt
- Flow meter
- 1x HEPA filter
- 1x pre-filters (pk 10).
Part # 03-601-FR
HX5 ™ PAPR Industrial Starter Pack
- Rechargeable battery and charging bank
- FR belt
- Flow meter
- 1x HEPA filter
- 1x spark arrestor
- 1x pre-filters (pk 10).
Part # 03-603
HX5 ™ PAPR Easy Clean Starter Pack with Backpack Assembly
- Rechargeable battery and charging bank
- Easy clean backpack assembly
- Flow meter
- 1x HEPA filter
- 1x pre-filters (pk 10).
Part # 03-603-FR
HX5 ™ PAPR Industrial Starter Pack with Backpack Assembly
- Rechargeable battery and charging bank
- FR backpack assembly
- Flow meter
- 1x HEPA filter
- 1x spark arrestor
- 1x pre-filters (pk 10).
HX5 ™ PAPR
Approved for use with the below headtops
Z-Link ® (Page 16)
Part # 16-010-12
Z-Link ®
Respirator with
Tychem ®
2000 Face Seal
Part # 16-000-21
Z-Link+ ®
Respirator with
Zytec ®
FR Shoulder Cape
Part # 16-010-24
Z-Link ®
Radiant Heat Respirator
Includes aluminized shoulder cape and top, rear and breathing tube covers.
Z4 ® (Page 33)
Part # 15-010-11
Z4 ® Respirator with
FR Face Seal
Part # 15-010-21
Z4 ®
Respirator with FR Shoulder Cape
T-Link ® (Page 54)
 |
Part # 17-110-12 T-Link Respirator with Tychem ® 2000 Hood Bump cap assembly. |
 |
Part # 17-010-13 T-Link ® Respirator with Tychem ® 4000 Hood Hard hat assembly. |
T200 ™ Headtops (Page 64)
 |
Part # 17-200-22 T200 ™ Respirator with Tychem ® 2000 Face Seal Head harness assembly. |
 |
Part # 17-200-32 T200 ™ Respirator with Tychem ® 2000 Shoulder Length Hood with Face Seal Head harness assembly. |
 |
Part # 17-210-13 T200 ® Respirator with Tychem ® 4000 Hood with Sealed Seams Bump Cap assembly. |
HX5 PAPR – Parts
HX5 ™ PAPR Filters/Cartridges
 |
Part # 03-890 Pre-filters (pk 10) |
 |
Part # 03-891 PAPR Spark Arrestor |
 |
Part # 03-892 HEPA Filter |
HX5 ™ PAPR Accessories
 |
Part # 03-822-DC Back Harness Assembly Decon/easy clean. |
 |
Part # 03-822-FR Back Harness Assembly FR. |
 |
Part # 04-852 Tychem ® Breathing Tube Cover Breathing tube not included. |
 |
Part # 04-854 FR Breathing Tube Cover Breathing tube not included. |
HX5 ™ PAPR Accessories
 |
Part # 04-856 Disposable/Decon Breathing Tube Sleeve (pk 10) Breathing tube not included. |
 |
Part # 04-872 Short Tychem ® Breathing Tube Cover For backpack assembly, breathing tube not included. |
 |
Part # 04-874 Short FR Breathing Tube Cover For backpack assembly, breathing tube not included. |
HX5 ™ PAPR Parts
 |
Part # 04-831 PX5 ® Breathing Tube |
 |
Part # 04-841 PX5 ® Breathing Tube Short For use with Back Harness. |
 |
Part # 04-834 PAPR Coupler Seal (pk 5) |
 |
Part # 03-610 Fan Housing |
HX5 ™ PAPR Parts
 |
Part # 03-811 Belt Support Mount |
 |
Part # 03-812 Door Cover |
 |
Part # 03-813 HEPA Filter Door |
 |
Part # 03-815 Battery Door Assembly Includes 03-818. |
 |
Part # 03-817 Battery Door Seal |
 |
Part # 03-818 Door Hinge |
 |
Part # 03-819 Flow Meter |
 |
Part # 03-851 Battery Charger |
 |
Part # 03-855 Battery |
 |
Part # 03-856 High Capacity Battery |
 |
Part # 09-021 GVS-RPB ® Power Cable US plug. |
 |
Part # 07-765-DC GVS-RPB ® 2 Inch Belt Assembly Easy clean |
 |
Part # 07-765-FR GVS-RPB ® 2 Inch Belt Assembly FR |
Copyright © 2022 RPB Safety, LLC. All rights reserved. All materials contained in this publication are protected by United States copyright law and may not be reproduced, distributed, transmitted, displayed, published or broadcast without the prior written permission of RPB Safety, LLC. You may not alter or remove any trademark, copyright or other notice from copies of the content.
Trademarks and Other Intellectual Property. All trademarks, service marks, and logos used in this publication, both registered and unregistered, are the trademarks, service marks, or logos of their respective owners. The green and gray color combination is a registered trademark of RPB Safety, LLC. All rights in the GVS-RPB Intellectual Property contained in this publication, including copyright, trademarks, service marks, trade secret, and patent rights are reserved. GVS-RPB Intellectual Property means any patent, patented articles, patent applications, designs, industrial designs, copyrights, software, source code, database rights, moral rights, inventions, techniques, technical data, trade secrets, know-how, brands, trademarks, trade names, slogans, logos, and any other common law and proprietary rights, whether registered or unregistered anywhere in the world, that are owned by, developed in whole or in part by, or licensed by GVS S.p.A or RPB Safety, LLC. DuPont ™ Tychem ® is a registered trademark of E.I. du Pont de Nemours and Company or its affiliates.
WARNING
PRODUCT SELECTION
- Determine what type of protection is required for your activity.
As applicable, check your workplace safety program, respiratory protection program, and standards and regulations for your activity or industry. - Check product specifications. Contact GVS-RPB ® or check the product instruction manual (downloadable from gvs-rpb.com) for complete specifications, including approvals, standards, and regulations to which the product conforms.
- Make sure you have a complete system. Verify that you have or are purchasing all required components. System requirements are available from GVS-RPB ® or in product instruction manuals.
Selecting inappropriate or incomplete equipment, including the use of counterfeit or non-GVS-RPB ® parts, can result in inadequate protection and will void the NIOSH approval of the entire respirator.