Contents
DRIP IRRIGATION KIT
______________________
USER MANUAL
If you encounter problems,
please contact us through Amazon.
IMPORTANT !
PLEASE READ !
- Only use with clean water to avoid blocking the nozzle due to a large number of solid impurities in the water.
- When it is about to freeze, please take down the drip irrigation kit from the hose faucet to avoid potential freezing hazards.
- The assembly process only needs to be assisted by scissors. Please do not disassemble or assemble violently during installation.
- Please contact us through Amazon if any problem occurs during use.
PRODUCT OVERVIEW
- US standard ¾” thread to 15mm hose QC
- Quick connect tee
- Adjustable nozzle
- 15mm plug
- 15mm hose to 6mm hose QC connector
- Fixed inserting rod
- 6mm plug
PARAMETER
|
US standard ¾” thread to 15mm hose QC |
Used to connect the tap to 15mm hose |
| 15mm hose to 6mm hose QC connector |
For 15mm hose shunting to 6mm hose |
|
Quick connect tee |
Used to connect 6 * 4mm hose |
| Fixed inserting rod |
For grounding or suspension |
|
Adjustable nozzle |
Adjust water volume |
| 15mm hose |
Water main pipe |
|
6mm hose |
Water branch pipe |
| 15mm plug |
Plug the end of 15mm hose |
|
6mm plug |
Plug the end of 6mm hose |
PARTS
|
MODEL PARTS |
QC-DG18 |
QC-DG36 | QC-DG45 | QC-DG60 |
| US standard ¾” thread to 15mm hose QC (pc) | 1 | 1 | 1 |
1 |
|
15mm hose to 6mm hose QC connector (pc) |
1 | 2 | 3 | 4 |
| Quick connect tee (pc) | 15 | 28 | 36 |
48 |
|
Fixed inserting rod (pc) |
15 | 28 | 36 | 48 |
| Adjustable nozzle (pc) | 15 | 28 | 36 |
48 |
|
15mm hose (ft) |
10 | 20 | 26 | 33 |
| 6mm hose (ft) | 49 | 98 | 121 |
164 |
|
15mm plug (pc) |
1 | 1 | 1 | 1 |
| 6mm plug (pc) | 4 | 8 | 12 |
16 |
INSTALLATION PROCESS
US standard ¾” thread to 15mm hose QC
1. Check whether there is gasket inside.
2. Hand tighten it clockwise, do not use tools to help, so as to avoid damaging the product.
3. Insert 15mm hose and pull the hose to check whether it is fixed.
4. Press the blue claw inward and pull the hose outward.
TIP: If the hose is difficult to pull out, press the blue claw firmly and rotate the hose for several turns to remove the hose.
15mm hose to 6mm hose QC connector
Install:
1 Insert 15mm hose and pull the hose to check whether it is fixed.
2. Insert 6mm hose and pull the hose to check whether it is fixed.
Disassemble:
1. Remove the 15mm hose: press the blue claw inward and pull the hose outward.
(TIP: If the hose is difficult to pull out, press the blue claw firmly and rotate the pipe for several turns to remove the hose.)
2. Remove the 6mm hose: press the blue claw inward and pull the hose outward.
(TIP: If the hose is difficult to pull out, press the blue claw firmly and rotate the pipe for several turns to remove the hose.)
Quick connect tee
Install:
1. Insert 6mm hose and pull the hose to check whether it is fixed.
Disassemble:
2. Remove the 6mm hose: press the blue claw inward and pull the hose outward.
(TIP: If the hose is difficult to pull out, press the blue claw firmly and rotate the pipe for several turns to remove the hose.)
Fixed inserting rod
1. Installation: The installation is completed when the “click” sound is heard.
Disassemble:
1. Disassemble: After fixing the insert rod by hand, pull out the nozzle by force to complete the disassembly.
Adjustable nozzle
Tighten: Turn clockwise to reduce flow.
Loosen: Turn the flow increment counterclockwise.
Nozzle direction can be rotated 180 degrees.
15mm plug
Install
Disassemble:
Press the blue claw inward and pull out the plug.
6mm plug
Install
Disassemble:
Press the blue claw inward and pull out the plug.
TROUBLESHOOTING
1:
Water leakage at threaded joint
Measures:
(1) Check whether there is a rubber gasket.
(2) Check whether the faucet joint is a standard ¾” thread.
2:
15mm Quick connect connector leak
Measures:
Check whether the hose is completely inserted, and check by pulling the hose.
3:
6mm Quick connect connector leak
Measures:
Check whether the hose is completely inserted, and check by pulling the hose.
4:
No water from the nozzle
Measures:
(1) Check whether the faucet is open.
(2) Check whether the nozzle is completely closed.
USAGE SUGGESTIONS
Tips: It is recommended to cut a section of 15mm hose at 6-10ft and a section of 6 *4 hose at 2.6-3 ft.
INSTRUCTIONS
1. Ring connection: the end of the nozzle using 6mm hose connection, you can guarantee that the water pressure of each nozzle is similar.
(For long distance multi-nozzle)
2. Single-way connection: the end of the nozzle using 6mm plug blocking, the end of the nozzle water pressure will be attenuated.
(For short distance less nozzle)
