Zyxel WX3100-T0 Dual Band Wireless AX1800 Gigabit Extender User Guide

COMMUNICATION
WX3100-T0
Dual-Band Wireless AX1800 Gigabit Extender

Quick Start Guide

Package Contents

	Device
	Power Adapter
	Ethernet Cable
	Quick Start Guide
	Declaration of Conformity Safety Warnings

Support Information
https://service-provider.zyxel.com/global/en/tech-support

https://zyxelsp.com/tech-support

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark.
https://www.zyxel.com/dk/da/
UK Importer
Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham,
RG40 1XZ, United Kingdom (UK)
https://www.zyxel.com/uk/en/
US Importer
Zyxel Communications, Inc.
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright © 2023 Zyxel and/or its affiliates. All Rights Reserved.

Setting Up the WX3100

1. Attach the bracket to the bottom of the WX3100 as shown.
2. Place the WX3100 where you want to extend your wireless network.
3. Plug in the power adapter and turn on the WX3100. Wait for about 2 minutes.  The Power C) LED lights up steady green.

MPro Mesh Network Scenario 1: With MPro Mesh Router

 

In this scenario, you have a Zyxel router that supports MPro Mesh. If you do not, go to MPro Mesh Network Scenario 1: With Non-MPro Mesh Router and Two WX3100s.
Note: To check if your Zyxel router supports MPro Mesh, scan the QR code in the last page to see the MPro Mesh Router supported list.
Note: To set up your WX3100 with the MPro Mesh app, scan the QR code in the last page.

1. Use the included Ethernet cable to connect the WX3100 LAN port to the MPro Mesh Router LAN port. Wait until the POWER and LINK LEDs are steady green.
2. Unplug the Ethernet and power cable from the WX3100.
3. Place the WX3100 where you want to extend your WiFi network.
4. Plug in the power adapter. Make sure your LINK LED is steady green (preferred) or amber.
   For more details on the LEDs, please refer to the LED table.
   Note: You do not need to plug in the Ethernet cable in this step.
5. To add more extender to your network, repeat from step 1.

	Green On – Power is on or the MPro Mesh configuration process is done. Blinking – The WX3100-2 is starting up or under the MPro Mesh  configuration process. Red On – The WX3100-2 detects a system error. Blinking (Fast) – The WX3100-2 is upgrading firmware. Blinking (Slow) – The Easy Mesh process has failed.
	With Wireless Connection Green On – The WiFi connection to the WX3100-1 is good. Amber On – The signal is too strong. Suggest moving the WX3100-2 away  from the WX3100-1. Red On – The signal is too weak. Move the WX3100-2 closer to the WX3100-1. With Wired Connection Green On – The Ethernet cable is connected to the WX3100-2 LAN port.
	Green On – 2.4G/5G WiFi is ready. Blinking  – The WX3100-2 is transmitting/receiving WiFi data. Off – 2.4G/5G WiFi is disabled.
	Amber Blinking – The WPS is in process. Off –  The WPS process is done.

MPro Mesh Network Scenario 2: With Non-MPro Mesh Router and Two WX3100s

The WX3100 connected to the Non-MPro Mesh Router with an Ethernet cable is hereafter referred to as the first WX3100 (WX3100-1)

1. Use the included Ethernet cable to connect the first WX3100 (WX3100-1) LAN port to the Non-MPro Mesh Router LAN port. Wait until the POWER and LINK LEDs are steady green.
2. Place the second WX3100 (WX3100-2) where you want to extend your WiFi network.
3. Wait until the POWER and LINK LEDs on WX3100-2 are steady green (preferred) or amber to indicate that the auto-pairing is done. Move the WX3100-2 closer to the WX3100-1 if the LINK LED is red.
4. Scan the QR code at the last page to install the MPro Mesh App to manage your WX3100-1.

	Green On – Power is on or the MPro Mesh configuration process is done. Blinking – The WX3100-2 is starting up or under the MPro Mesh  configuration process. Red On – The WX3100-2 detects a system error. Blinking (Fast) – The WX3100-2 is upgrading firmware. Blinking (Slow) – The Easy Mesh process has failed.
	With Wireless Connection Green On – The WiFi connection to the WX3100-1 is good. Amber On – The signal is too strong. Suggest moving the WX3100-2 away  from the WX3100-1. Red On – The signal is too weak. Move the WX3100-2 closer to the WX3100-1. With Wired Connection Green On – The Ethernet cable is connected to the WX3100-2 LAN port.
	Green On – 2.4G/5G WiFi is ready. Blinking  – The WX3100-2 is transmitting/receiving WiFi data. Off – 2.4G/5G WiFi is disabled.
	Amber Blinking – The WPS is in process. Off –  The WPS process is done.

Managing Your WX3100 Using the MPro Mesh App

https://play.google.com/store/apps/details?id=zyxel.com.multyproneo		https://apps.apple.com/us/app/mpro-mesh/id1479660357

Download the MPro Mesh app to manage your WX3100.
Note: To manage your Mesh network, connect the MPro Mesh app to the Controller (WX3100-1 in Scenario 1 or MPro Mesh Router in Scenario 2).

https://www.zyxel.com/library/sp/MPro_Mesh_supported_model_list.pdf
Scan this QR code to see a list of Zyxel devices that support MPro Mesh.

https://www.zyxel.com/library/sp/compact_user_guide_wx3100.pdf
Scan this QR code to see steps for setting  up your WX3100 with the MPro Mesh app.