isassembly instructions
Metz 32MTC6110Z
Notwendige Werkzeuge:
Nessesary tools:
Screw driver PH2
1 Disassembly the rear panel
a) Remove screws with a screw driver PH2.
b) Slightly bend open the tabs and lift the rear wall at the same time.
Elkos may contain residual charges.
2 Disassembly of the printed circuit boards
Remove screws with a screw driver PH2.
Technical changes and errors excepted!
U2199_40319_00Metz Consumer Electronics GmbH
Ohmstrasse 55 – 90513 Zirndorf
Tel. (0911) 9706-0 – [email protected]