LOREX B463AJDEWHT Wi-Fi 2K Smart Video Doorbell User Manual
Contents
Package Contents
- 2K Battery Doorbell
- Mounting Bracket
- Horizontal Wedge 15°
- Vertical Wedge 5°
- Extension Wire
- Connecting Wires (x2)
- Reset Pin
- 1/4” Drill Bit
- Power Cable
- Anchors & Screws (x2)
- Wire Caps (x3)
Tools Needed
- Drill
- Screwdriver
Overview
- Release Tab
- Micro-USB Port
- Reset Button*
- Power Terminals
- MicroSD Card Slot
- QR Code
- Speaker
- Camera
- IR Light
- Light Sensor
- Microphone
- Status Indicator
- Call Button
- . Night Light
*Press and hold the reset button until you hear the voice prompts. To begin pairing, press the reset button again
Status Indicator
 |
Device start |
| Ready for network connection. | |
| Pairing to the Lore Home account. | |
| Operating correctly, pairing connection complete or event detected. | |
 |
2-way talk ongoing |
 |
Call ongoing |
| Factory reset.* | |
 |
Network connection failed.* |
 |
A firmware update is in progress |
Setup
- Download
- Tap Pulse
.
Note: Please fully charge prior to mounting. This could take up to 3 hours. 5V/2A power adapter is recommended (not included).
8-24 VAC is required for wired installation. If you do not have this voltage, you will need a 8-24 VAC doorbell transformer or you can consult with a licensed electrician
Need help?
Scan the below QR code for the Quick Start Guide and additional support material.
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at:
Copyright © 2022 Lorex Technology Inc
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
B463AJ_QSG_TRILINGUAL_R1