DOTS Coat Hooks Set
Instructions
Contents
DOTS Coat Hooks Set
WALL MOUNTING GUIDE
When mounting your Muuto product to a wall, it is important that it is mounted both securely and correctly. The best way to mount your product depends on the type of wall it is being attached to.
A wall plug is required and it is vital that you find one that fits both the screw and the wall material.
If in doubt, ask for advice in your local hardware store. They will be able to assist you in finding the right wall plug and screw.
ASSEMBLY INSTRUCTION
- Before mounting your Dot to the wall, drill a 6 mm hole and add a plug.
- Add the screw to the plug.
- Screw on your Dot (be careful not to tighten too hard to avoid damage inside.)
Metal Dots
- Metal Dots can be installed as a cabinet handle as shown below.
