1072905 Maxtuned LED Headlight
Instruction Manual
Contents
1072905 Maxtuned LED Headlight
Thank you for purchasing our Maxtuned LED headlight. Please read the following installation instructions carefully. If you do not have the necessary knowledge of motorcycle electrics for installation, it is advisable to have the headlight installed by a specialist workshop. We exclude any liability for damage caused by improper installation or use.
 |
|
| Headlight front view | Headlight rear view |
 |
|
| Power supply cable | Adapter cable for transfer wiring in case of deviating pin assignment |
Connection diagram
- White = Daytime Running Light
- Blue = Low Beam
- Black = Negative
- Brown = High Beam
Mistuned LED Headlight
Mounting instructions
Installation
- Untie the fastening straps on both sides of the original headlamp.
- Disconnect the headlight connector from the wiring harness and remove the original headlight.
- If you buy a lamp without lampshade, you need to install the original lampshade on the new lamp.
- Insert the connector of the new headlight into the socket of the wiring harness (pay attention to the correct pin assignment (see fi gure 1), x the position of the headlight and test the function. In case of deviating pin assignment, use the provided adapter cable for transfer wiring (see figure 2).
- Retie the fastening straps on both sides.
The transfer wiring
Heavy Tuned GmbH