one LIGHT 65660AT Track Spot LED Installation Guide

one LIGHT 65660AT Track Spot LED Installation Guide

INSTALLATION

1. To mount the track adaptor into the track system, first check that the selector knob A is at OFF position and the adaptor lock B is disengaged.
2. When installing the adaptor into the track, ensure that it is orientated correctly.
3. Rotate adaptor lock B clockwise 90° to connect the adaptor to the neutral circuit.
   
4. Rotate selector knob A to the position of desired circuit.
   
   • Circuit 1: Rotate the knob A 90° clockwise from the starting position OFF, to connect circuit 1.
     
   • Circuit 2: Rotate the knob A 90° anti-clockwise from the starting position OFF, to connect circuit 2.
     
   • Circuit 3: Rotate the knob A 180° clockwise from the starting position OFF, to connect circuit 3.
     
5. 1. Remove screws
   2. Remove cover
   3. Select the power according to the table
   

The default setting is 20W

Warnings:

1. Make sure that the product is installed properly before connecting to electricity.
2. Do not cover the fitting.
3. Maintenance and installation should only be carried out by a professional electrician
   

Complete with driver