V-TAC VT-6242U LED Backlit Panel Instruction Manual

VT-6242U LED Backlit Panel
LED BACKLIT PANEL
Instruction Manual

WEEE Number: 80133970
INSTALLATION INSTRUCTION

TECHNICAL DATA:

MODEL	VT-6242U	VT-6242
SKU	216777	6826-TPA/6827-TPA
SHAPE	SQUARE	SQUARE
WATTS	40W	36W
LUMENS	4000Im Useful Lumen	4320Im Useful Lumen
BEAM ANGLE	110°	110°
CRI	>80	>80
DF	>0.9	>0.9
ON/OFF CYCLE	>15,000	>15,000
LONG LIFE	30,000 HOURS	30,000 HOURS
OPERATION TEMPERATURE	-20°C to +45°C	-20°C to +45°C
INPUT POWER	DC:30-42V	DC:30-42V
DIMENSION	595x595x34mm	595x595x34mm
BODY TYPE	ALUMINUM+TPA(PC)
QUICK CONNECTOR IS AVAILABLE FOR VT-6242 ONLY

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query,  please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage  caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily  operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
5. For Indoor use only

Luminaires not suitable for covering with thermally insulating material.

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

Non-replaceable control gear	Non-replaceable light source

Note: The panel works on DC 30-42V, please connect correctly with the conductor before connecting the conductor to the power supply main.
‘This product contains a light source of energy efficiency class <F>’, where <F> shall be replaced by the energy efficiency class of the contained light source.

INSTALLATION DIAGRAM:

INSTALLATION INSTRUCTIONS

1. Make a hole into the ceiling.
2. Fix the panel into the ceiling.
3. Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply.
4. Turn on the switch, test the fixture light on.

  IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT [email protected]
V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.