Perfect Fit Pleated/Venetian Blind
Assembly & Fitting Instructions
Contents
Exploded Diagram
| 1 – Tensioned Pleated/Aluminium Venetian Blind 2 – Frame Section 3 – Extrusion Corner |
4 – Extrusion Corner Cover 5 – Fixing Bracket 6 – Assembled Perfect Fit Blind |
Perfect Fit Frame Assembly Instructions
- Carefully unwrap the blind parts and lay them out face down on a clean, even surface.
- Guide the side frame components onto the exposed arms of bottom corner joints and follow the same procedure with the top frame compartment.
- Secure the side frame components with supplied screws (1) and tighten attached middle corner joint screw (2). Repeat the process for each corner.
- Turn assembled frame face up and clip supplied Extrusion Corner Covers onto each corner joint.
- Your Perfect Fit blind is ready to be fitted.
Perfect Fit Blind Fitting Instructions
- To ensure all brackets are in correct position for fitting, measure 85mm from top and bottom beading on both sides of the window frame.
- Fit the bracket by pushing it between the glass and the rubber seal of the window. For ease insertion, use a lubricant in the form of washing up liquid on the base of each bracket. Repeat the process for each bracket.
- Clean excess lubricant and clip your Perfect Fit blind onto the window frame.
