Contents
cell2 ES3 3-LED Narrow Profile Lighthead
Surface Mount
Connect YELLOW wires of all heads together for synchronization (All heads should be set to the same pattern)
For Simultaneous or Alternating Flash:
- Apply +VDC to RED and YELLOW wires simultaneously to enter
Grouping mode; lighthead will display short (single or double) flashes:- Single flash = Group1
- Remove the YELLOW wire from +VDC and momentarily apply to +VDC to change Groups:
Heads in the same Group flash together.- Group1 Heads alternate with Group2 Heads
- Double flash = Group2 Heads
For Flash Patterns: Momentarily apply +VDC to
YELLOW wire: once for next pattern quick three times to reset to FP#1
NOTE: This unit may not be factory-set at FP#1.
| Double [2Hz] | 9 | Double [SAE] | |
| 2 | Single [2Hz] | 10 | Triple [SAE] |
| 3 | Triple [2Hz] | 11 | Quad [SAE] |
| 4 | Quad [2Hz] | 12 | Quint [SAE] |
| 5 | Random | 13 | Ultra [SAE] |
| 6 | Steady | 14 | Single-Quad |
| 7 | Single [SAE, CA13] | 15 | Single H/L |
| 8 | Mega | 16 | Single-Triple-Quint |
Universal Bracket (Angle-Adjustable)
L-Bracket (Front)
L-Bracket (Rear)
