8+
INSTRUCTIONS
1760 BEADS
Go to makeitrealplay.com for video instructions!
Contents
LEGEND
 |
Scissors |
 |
Ruler |
 |
Adhesive tape |
 |
Craft glue |
 |
Lat dry |
 |
knot |
 |
Double kno |
 |
Repeat |
 |
Find the center |
 |
You will need: |
BRACELET 1
- Measure and cut 35 cm (13 ¾ in) of elastic cord.
- Tape one end of the elastic on a flat surface.
- Thread the beads onto the elastic cord.
- Make a jeweler’’s knot and add a drop of glue.
Wait 5 minutes for it to dry
- Cut the excess elastic cord.
BRACELET 2
- Measure and cut 1 piece of 50 cm (19 ¾ in) of elastic cord.
- Leaving 8 cm (3 in), tape one end on a flat surface.
- Thread 7 beads.
- To create a daisy thread 4 pink beads and one yellow bead.
- Thread the elastic cord in the first pink bead again.
- Thread 2 pink beads.
- Thread the elastic cord in the fourth pink bead again.
- Repeat steps 3 to 7 until there are 5 daisies on the bracelet.
- Make a jewelers Knot and add a drop of que. Wait 5 minutes for it toe dry.
- Cut the excess elastic cord.
BRACELET 3
- Measure and cut 2 pieces of 35 cm (13 ¾in) of elastic cord.
- Tape one end of the elastics on a flat surface.
- Thread a bead on the left cord.
- Thread a jump ring on beth elastic cords.
- Thread a bead on the night cord.
- Thread a jump ring on both elastic cords.
- Repeat steps 3 to 6, twenty-four more times.
- Overlap the ends of each cord. Secure the knot with a drop of Craft que of dear nail polish and cut off the excess lengths of cord after the knot.
BRACELET 4
- Measure and cut 35 cm (13 ¾ in) of waxed cord.
- Thread 40 jump rings and center them on the cord.
- Make a simple Knot on each sides of the jump rings.
- To close the bracelet, make a knot with the left waxed cord onto the night waxed cord.
- Make a knot with the right waxed cord onto the left waxed cord.
- Cut the excess cords.
BRACELET 5
- Measure and cut 2 pieces of 35 cm (13 ¾ in) of waxed cord.
- Leaving 12 cm (4 ½ in), tape one end on a flat surface.
- Measure and cut 70 cm (27 ½ in) of waxed cord.
- Make square knots for 5 cm (2 in) long.
Square knots
- Add a drop of glue to the knot. Wait 5 minutes for it to dry. Cut the excess cords.
- Measure and cut 30 cm (12 in) of waxed cord.
- Make square knots for 1 cm (½in) long.
- Make a knot at both ends.
NECKLACE
- Measure and cut 1 m (39 ½ in) of waxed cord.
- Thread the beads and center them on the cord.
- Make a simple knoton each sides of the beads.
- Thread 3 beads. Make a simple knot. Gut the excess cords.
WARNING!
CHOKING HAZARD — small parts. Not suitable for children under 3 years.
STRANGULATION HAZARD — Keep away from young children.
 |
 |
MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville MD 21208 USA 410-995-8685
Jactin House, 24 Hood Street
Ancoats, Manchester, M4 6WX UK
+44 (0) 161 302 4100
MDSS GmbH
Schiffgraben 41, 31075 Hannover, DE
© 2022 MAKE IT REAL, LLC
makeitrealplay.com
Made In Chana