HOCO 2BDHT Intelligent Film Cutter User Manual

Intelligent Film Cutter
Manual

When turning on the film cutter, first put the pinch roller down and remove the protective film under the pinch roller

Product List

Appearance and function

1. Carriage
   Control the lateral move of the carriage.
2. Biade holder
   Cutting Film
   Seetl. 12. 13. 14.
3. Pinch Roller Wheel
   Fix film Vertical move
4. side panel
   Help to fx fim position and move direction
5. Operation display
   Touch to control device operation
6. Power Switch
   Start the device
7. Pover nterface
   Gonnect power
   Integated handle Press
8. Integrated handle press to control the lifing ofthe pinch roler
9. Blade Holder Position
   Lock the blade holder
10. Uss interface
11. Automatc paper feed sensor
12. LAN portinterface

Blade Level/ Cutting Pressure setting

Blade Holder (Level)	Level:2-4	Level:4-5	Level:6-7	Level:7-8	Level:9-10
Cutting Pressure	200-250	200-300	300-400	400-500	500 .
Speed	100-200	100-200	100	50-100	50
Material (Thickness)	Two Layers Back Film (0.1mm)	Two Layers Back Film (0.18mm)	Four Layers Soft Film (0.35mm)	Four Layers Soft Film Anti-explosion Film (0.45mm)	Four Layers Soft Film Anti-explosion Film (C.65mm)f

Instructions

1. install the blade holder“Tips: The blade wil gradually become dullwhen use a ot which affects the: cutting quality itis recommended to replace it in time:
   
2. Power connection, Starting upPlease use AC 100-240V : connect the adapter and power cord, and connect the other end of the power cord to AC 100-240V; the adapter’s DC output line plug is connected to the input port of the film cutter; install the blade holder to make sure it s fixed atthe right position of the carriage head. After the connection and installation are completed, press the power button to start the device.
3. screen film cutter machine operation
   When using it for the first time, click “Set Network” to complete the wifi connection, click *Mine” in the lower function bar, and find “Select Language” to complete the language setting
   After the system starts normally, enter the homepageEnter keywords in the search box, search for the product model you need to cut, and select the corresponding model.
4. Bluetooth connection
   Download the app with the OR code, and register an account afer entering the app
   • Enfr e prone umber, get e verfaton coce, and cik Next
   •  Tho deslrshe companycode, il your agstaton passwerd, and og.Log in to the app page, the app will prompt to turn on Bluetooth, enter the interface, click on the function bar “Mine” to enter the operating platform, click on “My device” to enter the link Bluetooth page.
5. Cutting film
   1.Please prepare a protective film to be cut as shown in the picture to ensure that the protective fim is flat and the film layer is compl ete without bending, folding or missing layers.2.Without automatic paper feeding:
   1. Press down the pressure bar to raise the pinch roller, put protective film in the dotted area.
   2. Raise the pressure bar to make the pinch roller press the protective film.3. With automatic paper feeding: Push the protective fim smooltly to the dotted areato et go.4. After checking that the protective film is properly placed,select the desired protective film model in the disply screen of the film cutting machine or through Bluetooth in the APP interface, and click “start cutting” to cut.5. After the cutting finished, the protective film will be automatically pushed out, take out the protective film, and complete the cutting.
6. The content of the manual will be revised irreguiarly according to product upgrades which may be different fromthe actual product Please refer to the actual product. Please forgive s, for any inconvenience caused!
   Product parameter

   Panel	5.5 Colorful HD screen
   Internet access	802.11 n Wireless LAN
   Power adapter input	100-24W 1.5A 50-60Hz
   Power adapter output	24V 2A DC
   Device input	24V 2A DC
   Power	4 W

Notice

	Avoid scratching your fingers
	The working environment where the machine is placed must be dean and tidy to prevent metal liquids from falling into the machine and cause fires, and there must be enough installation space.
	It is forbidden to damage or replace the original power cord. Do not excessively bend, pull, bind, or press the power cord under heavy objects to prevent damage to the power supply and cause electric shock or fire.
	If you do not use the machine for a long time, please disconnect the machine power to prevent fire.
	The table where the machine is placed must be flat and stable to prevent the machine from falling.
	When you want to disconnect the power, please grip under the plug and pull it out. Do not pull the cable. Forcibly pulling the cable may cause electric shock or fire.
	Prohibited to use during thunderstorms to avoid being hit by lightning
	Prohibit unauthorized disassembly

https://www.pgyer.com/eMJD

Scan the OR code, please download the film cutting machine App according to the prompts

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ‘against hamful interference in a fesidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation Ifthis equipment does cause hamful interference to radio or television reception, which can be defermined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment info an outlet on a circuit different from that to Which the receiver is connected
• Consut the dealer o an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly ‘approved by manufacturer could void your authority to operate this ‘equipment This device complies with part 15 of the FCC Rules.
Operation s subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

RF Exposure Information
“This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.