ACCURATE LR-SW Ligature Resistant Swinging Door System Instruction Manual

ACCURATE LR-SW Ligature Resistant Swinging Door System

Specifications

• Product Name: Ligature Resistant Swinging Door System
• Model Number: LR-SW
• Installation Type: Door frame or wall
• Required Space: At least 2 widths of space
• Hardware: Provided screws (22 sheet metal pins in Torx flathead screws and 7 #10 button head pin in Torx screws)

Product Usage Instructions

Door Location

• Locate where the LR-SW needs to be installed on the door frame or wall.
• Make sure there is at least 2 widths of space for the hardware to be installed properly. Height placement of the door may vary depending on the customer’s needs.

Mount Frame

Screw the pre-assembled LR-SW frame onto the area with provided screws (22 sheet metal pins in Torx flathead screws).

Mount Door

Screw LR-SW door into LR-SW frame with provided screws (7 #10 button head pin in Torx screws).

Adjust and Test

To adjust the door:

1. Place the door in the closed position.
2. Loosen the set screw.
3. Place a Torx wrench in the pin on the bottom head screw.
4. Adjust the door and tighten the set screw.

Frequently Asked Questions (FAQ)

Q: What is the required space for installation?
A: At least 2 width of space is required for proper installation of the hardware.

Q: How do I adjust the door?
A: Follow the steps below to adjust the door:

1. Place the door in the closed position.
2. Loosen the set screw.
3. Place a Torx wrench in the pin on the bottom head screw.
4. Adjust the door and tighten the set screw.

Q: Where can I contact for sales or support?
You can contact us at:

• Address: 1 Annie Place, Stamford, CT 06902
• Phone: 203.348.8865
• Email: [email protected]
• Website: www.accuratelockandhardware.com

INSTALLATION

1. Door location
   1. Locate where the LR-SW needs to be installed on the door frame or wall.
   2. Make sure there is at least 2⅛”  width of space for the hardware to be installed properly.
   3. Height placement of the door may vary depending on the customer’s needs.
2. Mount frame
   1. Screw the pre-assembled LR-SW frame onto the area with provided screws (22 sheet metal pin in Torx flathead screws).
3. Mount door
   1. Screw LR-SW door into LR-SW frame with provided screws (7 #10 button head pin in Torx screws)
4. Adjust + test
   To adjust the door:
   1. place the door in the closed position. loosen the set screw.
   2. place the Torx wrench in the pin on the bottom head screw.
   3. adjust the door and tighten the set screw

1 Annie Place
Stamford, CT 06902
P: 203.348.8865
E: [email protected]
W: www.accuratelockandhardware.com