Contents
MIYOTA Cal. 6S11 Watch Chronograph
INSTALLATION INSTRUCTION
FUNCTION: CHRONOGRAPH TIMING UP TO 59 MINUTES 59 SECONDS (CENTER CHRONOGRAPH SECONDS HAND, MINUTE HAND)
- A) DISPLAYS AND BUTTONS
- B) SETTING THE TIME
- C) SETTING THE DATE
- D) USING THE CHRONOGRAPH
- E) CHRONOGRAPH RESET (INC. AFTER REPLACING BATTERY)
- A) DISPLAYS AND BUTTONS
- B) SETTING THE TIME
- Pull the crown out to the 2nd Click Position.
- Turn the crown clockwise to set hour and minute hands.
- After the time has been set, push the crown back to the Normal position.
- C) SETTING THE DATE
- Pull the crown out to the 1st Click Position.
- Turn the crown clockwise to set the date.
- If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
- After the date has been set, push the crown back to the Normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/4 second united up to maximum of 59min 59sec.
【Measuring time with the stopwatch】
- Press button ” A ” to start the chronograph.
- The chronograph can be started and stopped each time button “A” is pressed.
- Press button “B” to reset the chronograph and chronograph minute and second hands return to their Zero positions.
- E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
- This procedure shoud be performed when the chronograph second hand does not return to the Zero position.
- Pull the crown out to the 2nd Click Position.
- Press the button “A” once to set the chronograph second hand to the Zero position.
- The chronograph hand can be advanced rapidly by continuously pressing button “A”.
- Once the hands are set at Zero position, reset the time and return the crown to its normal position.
- These specifications might be changed without prior notice.
- Cal. 6S11/6S21