MTI 94A Designer Collection Tubs Instruction Manual

MTI 94A Designer Collection Tubs 
Instruction Manual

• Options and accessories may be packaged inside the tub crate. Always check packaging before discarding.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.

• Before ordering or installing, please consider future access to equipment.
• Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides will need to be finished, along with location of optional tile flange(s).
• Overflow is factory installed for provided toe tap drain.
• When ordering an air bath, the air blower must be remote mounted.
• Microbubbles system components must be installed on a non-Sculpted Finish side.
  Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing the order.
• Radiance placed on floor locations will affect placement of air jets.
• Hydrotherapy equipment may ship loose for remote installation. See package content on the following page for details.
• Faucet valves cannot be installed on this tub model.
• All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/A326.3 coefficient of friction and AS HB198:2014 slip tests.