Aria Crib Liner
Instruction Manual
Contents
Safety Warnings
IMPORTANT! READ CAREFULLY.
RETAIN FOR FUTURE REFERENCE.
WARNING: Do not use this product without reading the instructions for use first.
WARNING: Stop using the product as soon as the child can sit or kneel or pull itself up.
WARNING: Placing additional items in the product may cause suffocation.
WARNING: Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords etc.
WARNING: Do not use more than one mattress in the product.
- The product should be placed on a horizontal floor.
- Young children should not be allowed to play unsupervised in the vicinity of the crib.
- All assembly fittings should always be tightened properly and care should be taken that no screws are loose because a child could trap parts of the body or clothing (e.g. strings. necklaces, ribbons for babies dummies etc.) which would pose a risk of strangulation.
- The crib requires a mattress of 75 x 40 cm.
- The maximum thickness of the mattress is 50mm, this is listed on the label in the liner
- Be aware of the risk of burning cigarettes. open fires and other sources of strong heat. such as electric bar fires, gas fires. etc. in the near vicinity of the crib.
- The liner of the crib can be washed at 30 degrees on a synthetics cycle and dried flat. Do not use bleach, do not tumble dry, do not dry clean.
- DO NOT use the crib if any part is missing damaged or broken. Contact CuddleCo customer service for replacement parts and instructional literature if needed. DO NOT substitute parts.
- DO NOT use the crib without the liner fitted and secured with the tie straps.
- Your child’s safety is your responsibility
- Furniture can be dangerous if incorrectly installed. assembly should be carried out by a competent person.
- Follow the instructions in detail to ensure the safety features of the crib are not compromised.
Attaching Liner
 |
 |
| Step 1 Unfold crib liner and place in crib. Ensure labels are visible on the inside |
Step 2 Take one of the tie straps and thread around the back of the spindle. Secure to the other strap and spindle with a double knot. |
 |
 |
| Step 3 Insert the mattress on top of the liner with the zippered surface down. |
Step 4 Completed |
NEVER USE WITHOUT LINER PRESENT.