INTEGRATION MANUAL
Multiple 365id Scanners with Mews
GLOBAL ID VERIFICATION
Contents
CHECK 365ID SCANNER SETTINGS IN MEWS
All 365id Scanners must be correctly set in Mews up to work correctly. If not, information from the scans will not be transferred into Mews.
STEP 1
From the Mews mail menu go into the Marketplace submenu.
STEP 2
In Marketplace select My subscriptions. Check that there is only one “365id Scanner” and one “Passport scanner integration”. Any multiple subscriptions must be removed. If you had multiple 365id Scanners you must report your remaining access token to [email protected] to get a working integration. See the “Find my access token” later on in this document
STEP 3
Select Passport scanner integration -> Edit and then Passport Scanners. 
STEP 4
Check that all 365id Scanners that shall be used is named and the correct serial number is present.
STEP 5
Go back to My Subscriptions and select 365id Scanner -> Edit
STEP 6
Under Connected devices select the 365id Scanners that shall be active and then press Save. Check that Mews verifies that the changes are saved.
STEP 7
Now all selected 365id Scanners are ready for use
FIND MY ACCESS TOKEN
The 365id integration must have the correct access token to work. You can find your access token under Marketplace -> My subscriptions -> 365id Scanner